20130112-155457.jpg

Replacing a few reed plates in a sweet, little accordion this afternoon. This kind of job is always rife with pleasant odors. Accordions generally have a fine aroma of their own, add to that the smell wafting up from my wax hotpot and the nose begins to feast.

Well, after working a bit on this little gem, I’ve found that there is a deeper issue: the reed block is cracked. I noticed that prior repairs had been done using glue to seat the reed plate. This is likely the cause of the cracked block.

20130112-174745.jpg

Next, I’ll prepare to remove all the reeds by marking the plates with a code to assist in reassembly. Then I’ll pull all the plates, clean the old wax, and asses the situation.

20130112-203057.jpg

There is damage to the reed chambers which must be repaired.

IMG_8231

After taking care of that structural repair I made sure any cracks remaining were sealed with wax; an air tight situation is necessary. I then replaced the reed plates, rewaxed the whole assembly and put the instrument back together for a test. Three keys sounded like the reeds were dirty on the exhale. An easy cleaning fixed that problem.

Back together again, and working like a charm.

20130112-204738.jpg

Join the Rosewood Mailing List

For updates on podcast episodes, sales, and more.

You have Successfully Subscribed!

Share This